CRANKSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL CRANKSHAFT POSITION SENSOR


    1. Apply a coat of engine oil to an O-ring of the crankshaft position sensor.

      Note


      • When reusing the crankshaft position sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the crankshaft position sensor.

    2. Install the crankshaft position sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Connect the crankshaft position sensor connector.

  2. INSTALL COOLER COMPRESSOR ASSEMBLY

    Click here