ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION

Tech Tips

w/ Canister Pump Module:

Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor Click here.


  1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR

    Tech Tips

    w/ Canister Pump Module:

    Perform "Inspection After Repairs" after replacing the engine coolant temperature sensor Click here.


    1. Install a new gasket to the engine coolant temperature sensor.

    2. Install the engine coolant temperature sensor.

      Torque:
      20 N*m  { 200 kgf*cm, 14 ft.*lbf }

    3. Connect the engine coolant temperature sensor connector.

  2. CONNECT WATER BY-PASS HOSE


    1. Connect the water by-pass hose to the rear water by-pass joint.

  3. INSTALL FUEL PRESSURE SENSOR

    Click here