CRANKSHAFT POSITION SENSOR INSTALLATION

INSTALL CRANKSHAFT POSITION SENSOR

1. Apply a coat of engine oil to an O-ring of the crankshaft position sensor.

   Note

   
   

   • When reusing the crankshaft position sensor, inspect the O-ring.

   • Make sure that the O-ring is not cracked or jammed when installing the crankshaft position sensor.

2. Install the crankshaft position sensor with the bolt.

   Torque:

   10 N*m  { 102 kgf*cm, 7 ft.*lbf }

3. Connect the crankshaft position sensor connector.

INSTALL COOLER COMPRESSOR ASSEMBLY

• for 2WD: Click here

• for AWD: Click here