| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| No. 1 drive shaft bearing bracket setting bolt | 32 | 326 | 24 |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Rear suspension member brace x Rear suspension member | 56 | 571 | 41 |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| No. 1 exhaust pipe support bracket sub-assembly x Automatic transmission | 43 | 438 | 32 |
| Front propeller shaft assembly x Transfer companion flange | 25 | 255 | 18 |
| Front propeller shaft assembly x Front differential companion flange |
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Front No. 1 floor heat insulator x Body | 5.4 | 55 | 48 in.*lbf |
| No. 1 fuel tank protector x Body | 5.0 | 51 | 44 in.*lbf |
| Propeller with center bearing shaft assembly x Transmission companion flange (for 2GR-FSE 2WD) | 79 | 806 | 58 |
| Propeller with center bearing shaft assembly x Differential companion flange (for 2GR-FSE 2WD, 2GR-FSE AWD) | |||
| Propeller with center bearing shaft assembly x Differential companion flange (for 4GR-FSE) | 74 | 749 | 54 |
| No. 1 center support bearing assembly x Body | 49 | 501 | 36 |
| Adjusting nut (for 2GR-FSE 2WD) | 69 | 704 | 51 |
| 47* |
479* |
35* |
|
| Flange nut (for 2GR-FSE AWD, 4GR-FSE) | 1st: 182 | 1st: 1851 | 1st: 134 |
| 2nd: 69 | 2nd: 701 | 2nd: 51 | |
| Propeller shaft assembly x Propeller intermediate shaft assembly (for 2GR-FSE AWD) | 74 | 751 | 54 |
| Propeller shaft assembly x Propeller intermediate shaft assembly (for 4GR-FSE) | 74 | 749 | 54 |
*: For use with SST