VEHICLE STABILITY CONTROL SYSTEM DTC CHECK / CLEAR

DTC CHECK/CLEAR (When Using the GTS)

1. Check for DTCs.

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the engine switch on (IG).

   3. Turn the GTS on.

   4. Read the DTCs following the prompts on the GTS. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

   5. Check the details of the DTCs Click here.

2. Clear the DTCs.

   
   

   1. Connect the GTS to the DLC3.

   2. Turn the engine switch on (IG).

   3. Turn the GTS on.

   4. Operate the GTS to clear the codes. Enter the following menus: Chassis / ABS/VSC/TRC / Trouble Codes.

   5. According to the display on the GTS, select the trouble code data display with the clear button.

DTC CHECK/CLEAR (When not Using the GTS)

1. Check for DTCs.

   
   
   1. 

      Text in Illustration

      *1

      DLC3

      Using SST, connect terminals TC and CG of the DLC3.

      SST

      09843-18040

   2. Turn the engine switch on (IG).

   3. Read the DTCs output from the ABS warning light and slip indicator light in the combination meter.

      Tech Tips

      
      

      • When the system is normal, the ABS warning light and slip indicator light blink at 0.25 second intervals (0.25 seconds on and 0.25 seconds off).

      • When only 1 DTC is stored, the light outputs the same code after an interval of 4 seconds. Example: When DTC 21 is stored, the light blinks twice, turns off for 1.5 seconds, blinks once, turns off for 4 seconds, and then repeats this output pattern.

      • When 2 or more DTCs are stored, the light outputs the codes with an interval of 2.5 seconds between each different code, and the output of all codes repeats after an interval of 4 seconds.

      • If no code is output, inspect the TC and CG terminal circuit and the ABS warning light and slip indicator light circuits.

      Trouble Area	See Procedure
      TC and CG terminal circuit	Click here
      ABS warning light circuit (Remains on)	Click here
      ABS warning light circuit (Does not come on)	Click here
      Slip indicator light circuit (Remains on)	Click here
      Slip indicator light circuit (Does not come on)	Click here

   4. Check the details of the DTCs.

      ABS DTC

      Warning Light Display	GTS Display
      11	C146E
      12	C146F
      13	C146C
      14	C146D
      21	C1468
      22	C1469
      23	C146A
      24	C146B
      25	C1225
      31	C1401
      	C1405
      	C1409
      32	C1402
      	C1406
      	C1410
      33	C1403
      	C1407
      	C1411
      34	C1404
      	C1408
      	C1412
      35	C1413
      36	C1414
      38	C1415
      39	C1416
      41	C1241
      	C1417
      	C120B
      43	C1232
      	C1243
      44	C1419
      	C1420
      	C1442
      45	C1245
      46	C1421
      	C1422
      	C1423
      	C1424
      	C1449
      49	C1425
      	C1426
      51	C1427
      	C1428
      59	C1203
      67	C1429
      	C1430
      	C1431
      91	C1361
      94	U0073
      95	C1240
      	U0124
      97	C1381
      98	C1336

      VSC DTC

      Indicator Light Display	GTS Display
      15	U0134
      16	C120E
      31	C1432
      	C1433
      	C1434
      34	C1435
      	C1436
      	C1443
      36	C1210
      41	C1289
      43*	-
      62	U0123
      63	U0126
      64	C1380
      65	C1437
      	U0100
      66	C1290
      	C1439
      	C1445
      68	U0130
      98	C1440

      *: This DTC is output when the VSC system detects a malfunction in the ABS.

   5. After completing the check, disconnect terminals TC and CG of the DLC3 to turn off the display.

      If 2 or more DTCs are detected at the same time, the DTCs will be displayed in ascending order.

2. Clear the DTCs.

   
   
   1. 

      Text in Illustration

      *1

      DLC3

      Using SST, connect terminals TC and CG of the DLC3.

      SST

      09843-18040

   2. Turn the engine switch on (IG).

   3. Clear the DTCs stored in the ECU by depressing the brake pedal 8 times or more within 5 seconds.

   4. Check that the warning light indicates a normal system code.

   5. Remove SST from the terminals of the DLC3.

END OF DTC CHECK/CLEAR

1. Turn the engine switch on (IG).

2. Check that the ABS warning and slip indicator lights go off within approximately 3 seconds after turning the engine switch on (IG).