VEHICLE STABILITY CONTROL SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

VEHICLE BROUGHT TO WORKSHOP

NEXT

CUSTOMER PROBLEM ANALYSIS

1. Interview the customer and confirm the problem Click here.

   
   

   NEXT

CHECK DTC AND FREEZE FRAME DATA*

1. Check and record DTCs and Freeze Frame Data.

2. Clear the DTCs and Freeze Frame Data Click here for DTC Check/Clear, or Click here for Freeze Frame Data).

3. Reconfirm the DTCs.

   
   

   1. Reconfirm the DTCs based on the recorded DTCs and Freeze Frame Data Click here for DTC Check/Clear, or Click here for Freeze Frame Data).

      Tech Tips

      
      

      • When DTCs indicating CAN communication system malfunctions are output, repair the CAN communication system before repairing each corresponding sensor (for LHD: Click here, for RHD: Click here.

      • If any of DTCs U0100, U0123, U0124, and U0126 is output together with a CAN communication DTC, first check the appropriate sensor for a momentary open circuit Click here.

      Result

      Result	Proceed to
      DTC is output	A
      DTC is not output (Problem symptom does not occur)	B
      DTC is not output (Problem symptom occurs)	C

   
   

   B

   GO TO STEP 5

   C

   GO TO STEP 6

   A

DIAGNOSTIC TROUBLE CODE CHART

1. Proceed to Diagnostic Trouble Code Chart Click here.

   
   

   NEXT

   GO TO STEP 7

SYMPTOM SIMULATION

1. Proceed to How to Proceed with Troubleshooting Click here.

   
   

   NEXT

PROBLEM SYMPTOMS TABLE

1. Proceed to Problem Symptoms Table Click here.

   
   

   NEXT

CIRCUIT INSPECTION*

NEXT

IDENTIFICATION OF PROBLEM

NEXT

REPAIR OR REPLACEMENT

NEXT

CONFIRMATION TEST*

NEXT