TIRE PRESSURE WARNING INITIATOR DRIVER (for RHD) INSTALLATION


  1. INSTALL TIRE PRESSURE MONITOR INITIATOR DRIVER


    1. Install the tire pressure monitor initiator driver with the nut.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    2. Connect the connector.

  2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here