TIRE PRESSURE WARNING INITIATOR (for Rear Side) INSTALLATION


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

  2. INSTALL REAR TIRE PRESSURE MONITOR INITIATOR


    1. Install the rear tire pressure monitor initiator with the 2 nuts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    2. Connect the grommet.

    3. Connect the connector.

  3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

    Click here

  4. INSTALL REAR WHEEL HOUSE LINER LH


    1. Install the rear wheel house liner LH with the 9 nuts, 4 clips and 3 screws.

  5. INSTALL REAR WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }

  6. INSPECT TIRE PRESSURE WARNING SYSTEM

    Click here