FRONT STABILIZER BAR (for AWD) INSTALLATION


  1. INSTALL FRONT STABILIZER BAR


    1. A01FIFCE02
      Text in Illustration
      *1 Identification Mark
      A01FGIV Right Side of the Vehicle

      Install the front stabilizer bar to the vehicle.

      Note

      The identification mark must be on the right side of the vehicle when installing the front stabilizer bar.

  2. INSTALL FRONT NO. 1 STABILIZER BAR BUSH


    1. A01FG4KE02
      Text in Illustration
      *1 Bush Stopper
      A01FJ4N Front Side of the Vehicle

      Install the 2 front No. 1 stabilizer bar bushes outside of the bush stoppers on the front stabilizer bar as shown in the illustration.

      Note

      Be sure to install the front No. 1 stabilizer bar bush so that the cutouts face the front of the vehicle.

  3. INSTALL FRONT NO. 2 STABILIZER BRACKET LH


    1. A01FGNC

      Install the front No. 2 stabilizer bracket LH on the vehicle with the 2 bolts.

      Torque:
      78 N*m  { 795 kgf*cm, 58 ft.*lbf }

  4. INSTALL FRONT NO. 2 STABILIZER BRACKET RH

    Tech Tips

    Install the RH side following the same procedures as with the LH side.

  5. INSTALL FRONT STABILIZER LINK ASSEMBLY LH


    1. A01FHKH

      Install the front stabilizer link assembly LH with the 2 nuts.

      Torque:
      84 N*m  { 857 kgf*cm, 62 ft.*lbf }

  6. INSTALL FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Install the RH side following the same procedures as with the LH side.

  7. INSTALL ENGINE ASSEMBLY WITH TRANSMISSION

    Click here