FRONT STABILIZER BAR (for 2WD) REMOVAL


  1. REMOVE FRONT WHEEL

  2. REMOVE ENGINE UNDER COVER


    1. A01FFKZE01
      Text in Illustration
      *A for 2WD
      *B for AWD

      for 2WD:

      Remove the 13 screws, 3 clips and engine under cover.

    2. for AWD:

      Remove the 10 screws, 3 clips and engine under cover.

  3. REMOVE FRONT NO. 2 UPPER SUSPENSION MEMBER


    1. A01FI17

      Remove the 6 bolts and front No. 2 upper suspension member.

  4. REMOVE FRONT STABILIZER LINK ASSEMBLY LH


    1. A01FITW

      Remove the 2 nuts and the front stabilizer link assembly LH.

      Tech Tips

      If the ball joint turns together with the nut, use a 6 mm hexagon wrench to hold the stud.

  5. REMOVE FRONT STABILIZER LINK ASSEMBLY RH

    Tech Tips

    Remove the RH side following the same procedures as with the LH side.

  6. REMOVE REAR ENGINE UNDER COVER LH


    1. A01FH08

      Remove the bolt and rear engine under cover LH.

  7. REMOVE REAR ENGINE UNDER COVER RH

    Tech Tips

    Remove the RH side following the same procedures as with the LH side.

  8. REMOVE FRONT NO. 2 STABILIZER BRACKET LH


    1. A01FIKU

      Remove the 2 bolts and the front No. 2 stabilizer bracket LH from the front suspension crossmember.

  9. REMOVE FRONT NO. 2 STABILIZER BRACKET RH

    Tech Tips

    Remove the RH side following the same procedures as with the LH side.

  10. REMOVE FRONT NO. 1 STABILIZER BRACKET LH


    1. A01FIC3

      Remove the 4 bolts and the front No. 1 stabilizer bracket LH from the frame.

  11. REMOVE FRONT NO. 1 STABILIZER BRACKET RH

    Tech Tips

    Remove the RH side following the same procedures as with the LH side.

  12. REMOVE FRONT NO. 1 STABILIZER BAR BUSH


    1. Remove the 2 front No. 1 stabilizer bar bushes from the front stabilizer bar.

  13. REMOVE FRONT STABILIZER BAR


    1. Remove the front stabilizer bar from the vehicle.