ADAPTIVE VARIABLE SUSPENSION SYSTEM TERMINALS OF ECU


  1. CHECK ABSORBER CONTROL ECU

    A01FGI2E17
    Text in Illustration
    *a

    Component with harness connected

    (Absorber Control ECU)

    		 - -

    Tech Tips


    • Inspect the connectors from the back side while the connectors are connected.

    • Check the operation of a particular valve by listening for operating sounds or by using the Data List.

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    A37-9 (SBL3) - Body ground R Front acceleration sensor LH power source Engine switch on (IG) 4.75 to 5.25 V
    A37-10 (SGL3) - Body ground BR Front acceleration sensor LH ground Always Below 1 Ω
    A37-18 (SGFL) - Body ground LG Front acceleration sensor LH Engine switch on (IG) 0 to 5 V
    N105-3 (B) - Body ground B IG power supply Engine switch on (IG) 11 to 14 V
    N105-5 (GND) - Body ground W-B Ground Always Below 1 Ω
    N105-7 (CANH) - N105-8 (CANL) G - LG CAN communication line Engine switch off 54 to 69 Ω
    N105-16 (SGR3) - Body ground LG Rear acceleration sensor ground Always Below 1 Ω
    N105-17 (SBR3) - Body ground BR Rear acceleration sensor power source Engine switch on (IG) 4.75 to 5.25 V
    N105-20 (CA2H) - N105-21 (CA2L) L - SB CAN communication line Engine switch off 54 to 69 Ω
    N105-26 (SGRR) - Body ground Y Rear acceleration sensor Engine switch on (IG) 0 to 5 V