REAR ACCELERATION SENSOR INSTALLATION


  1. INSTALL REAR ACCELERATION SENSOR ASSEMBLY


    1. Install the rear acceleration sensor assembly with the bolt.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      Note


      • Avoid any impact to the acceleration sensor.

      • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

      • The acceleration sensor must not be placed upside down.

    2. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT TRIM COVER INNER RH

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSPECT ADAPTIVE VARIABLE SUSPENSION SYSTEM

    Click here