DIFFERENTIAL MOUNT CUSHION INSTALLATION


  1. INSTALL REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, install a new rear No. 1 differential mount cushion.

      SST
      09316-12010
      09570-24011
      A01FE8TE02
      Text in Illustration
      *A for 2GR-FSE *B for 4GR-FSE
      *a Protrusion *b 0° +/- 3°
      A01FJ4N Front of Vehicle - -

      Note


      • Make sure that the differential mount cushion is aligned within 3° from the center.

      • Be sure to use the correct combination of SST.

      • Before using SST, apply grease to SST bolts.

      • Temporarily install the rear No. 1 differential mount cushion to the rear suspension member sub-assembly in order to prevent it from tilting, and then install SST.

      • Make sure that SST contacts the entire circumference of the rear No. 1 differential mount cushion.

      • Do not tilt the bolts of SST.

      • Tighten the 2 bolts of SST so that they enter the 2 holes of the rear No. 1 differential mount cushion by an equal amount.

  2. INSTALL REAR NO. 2 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, install a new rear No. 2 differential mount cushion.

      SST
      09316-12010
      09570-24011
      A01FHXBE02
      Text in Illustration
      *A for 2GR-FSE *B for 4GR-FSE
      *a 0° +/- 3° - -
      A01FJ4N Front of Vehicle - -

      Note


      • Make sure that the differential mount cushion is aligned within 3° from the center.

      • Be sure to use the correct combination of SST.

      • Before using SST, apply grease to SST bolt.

      • Temporarily install the rear No. 2 differential mount cushion to the rear suspension member sub-assembly in order to prevent it from tilting, and then install SST.

      • Make sure that SST contacts the entire circumference of the rear No. 2 differential mount cushion.

      • Do not tilt the bolts of SST.

  3. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY


    1. for 2GR-FSE:

      Click here

    2. for 4GR-FSE:

      Click here