FRONT PROPELLER SHAFT ASSEMBLY INSTALLATION


  1. INSTALL FRONT PROPELLER SHAFT ASSEMBLY


    1. Completely remove any oil or the like and clean the constant velocity universal joint washers and the contact surfaces of the front propeller shaft assembly, transfer and front differential.

    2. Align the matchmarks on the transfer companion flange and the front propeller shaft assembly.

    3. A01FF6TE01
      Text in Illustration
      *a Matchmark
      A01FJ4N Clean off oil and other foreign matter completely

      Temporarily tighten the front propeller shaft assembly with the 6 bolts and 2 constant velocity universal joint washers.

      Note

      Completely remove any oil or the like and clean the contact surfaces of the bolt.

    4. Align the matchmarks on the differential companion flange and the front propeller shaft assembly.

    5. A01FE4OE01
      Text in Illustration
      *a Matchmark
      A01FJ4N Clean off oil and other foreign matter completely

      Temporarily tighten the front propeller shaft assembly with the 6 bolts and 2 constant velocity universal joint washers.

      Note

      Completely remove any oil or the like and clean the contact surfaces of the bolt.

    6. A01FE2NE01
      Text in Illustration
      *a Turn
      *b Hold

      Using a screwdriver or an equivalent, hold the transfer companion flange.

    7. Using a socket hexagon wrench 6 mm, fully tighten the front propeller shaft assembly with the 6 bolts.

      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

      Note

      Be careful not to damage the front propeller shaft.

    8. A01FDIOE04
      Text in Illustration
      *a Turn
      *b Hold

      Using a screwdriver or an equivalent, hold the transfer companion flange.

    9. Using a socket hexagon wrench 6 mm, fully tighten the front propeller shaft assembly with the 6 bolts.

      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }

      Note

      Be careful not to damage the front propeller shaft.

  2. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY


    1. Install the No. 1 exhaust pipe support bracket sub-assembly with the 2 bolts.

      Torque:
      43 N*m  { 438 kgf*cm, 32 ft.*lbf }

  3. INSTALL FRONT EXHAUST PIPE ASSEMBLY

    Click here