FRONT DRIVE SHAFT ASSEMBLY INSPECTION

Note


  • When using a vise, place aluminum plates between the part and vise.

  • When using a vise, do not overtighten it.


  1. INSPECT FRONT DRIVE SHAFT ASSEMBLY


    1. A01FHQU

      Check that there is no excessive play in the radial direction of the outboard joint.

    2. Check that the inboard joint slides smoothly in the thrust direction.

    3. Check that there is no severe play in the radial direction of the inboard joint.

    4. Check the 2 joint boots for damage.

    5. A01FGN8E01
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Check that the 2 joint boots are not stretched or contracted when the front drive shaft is at the standard length.

      Length (A)
      Item Length
      for LH Side 569 mm (1.87 ft.)
      for RH Side 948.3 mm (3.11 ft.)