REAR AXLE HUB ON-VEHICLE INSPECTION


  1. REMOVE REAR WHEEL

  2. REMOVE REAR DISC BRAKE CALIPER ASSEMBLY


    1. A01FGYZE01
      Text in Illustration
      *a Hold
      *b Turn

      Hold the rear disc brake cylinder slide pins and remove the 2 bolts and rear disc brake cylinder assembly.

  3. REMOVE REAR DISC


    1. A01FGIBE01
      Text in Illustration
      *a Matchmark

      Place matchmarks on the rear disc and axle hub.

    2. Release the parking brake.

    3. A01FIH0

      Turn the shoe adjuster until the disc turns freely, and then remove the rear disc.

    4. Install the shoe adjusting hole plug to the rear disc.

  4. INSPECT REAR AXLE HUB BEARING LOOSENESS


    1. A01FIPN

      Using a dial indicator, check for looseness near the center of the axle hub.

      Maximum
      0.05 mm (0.0020 in.)

      Note

      Ensure that the dial indicator is set at right angles to the measurement surface.

      If looseness exceeds the maximum, replace the axle hub assembly.

  5. INSPECT REAR AXLE HUB RUNOUT


    1. A01FELE

      Using a dial indicator, check for runout on surface of the axle hub outside the hub bolt.

      Maximum
      0.05 mm (0.0020 in.)

      Note

      Ensure that the dial indicator is set at right angles to the measurement surface.

      If runout exceeds the maximum, replace the axle hub assembly.

  6. INSTALL REAR DISC


    1. A01FGIBE01
      Text in Illustration
      *a Matchmark

      Align the matchmarks of the rear disc and axle hub and install the rear disc.

      Note

      When replacing the rear disc with a new one, select the installation position where the rear disc has the smallest runout.

  7. INSTALL REAR DISC BRAKE CALIPER ASSEMBLY


    1. A01FDXYE01
      Text in Illustration
      *a Hold
      *b Turn

      Hold the rear disc brake cylinder slide pins and install the rear disc brake cylinder assembly to the disc brake cylinder mounting with 2 new bolts.

      Torque:
      27 N*m  { 270 kgf*cm, 20 ft.*lbf }

  8. INSTALL REAR WHEEL

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }