TRANSFER CASE REAR OIL SEAL REPLACEMENT


  1. DRAIN AUTOMATIC TRANSMISSION FLUID


    1. Remove the drain plug and gasket, and drain the ATF.

    2. Install a new gasket and the drain plug.

      Torque:
      20 N*m  { 204 kgf*cm, 15 ft.*lbf }

  2. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

    Click here

  3. REMOVE TRANSFER CASE OIL SEAL


    1. A01FD9GE01
      Text in Illustration
      *1 Transfer Case Oil Seal

      Using SST, remove the transfer case oil seal.

      SST
      09308-00010

  4. INSTALL TRANSFER CASE OIL SEAL


    1. A01FG4ZE01
      Text in Illustration
      *1 Transfer Case Oil Seal

      Using SST and a hammer, install a new transfer case oil seal.

      SST
      09325-40010
      Oil seal drive in depth
      2.3 to 2.7 mm (0.091 to 0.106 in.)

    2. Apply MP grease to the transfer case oil seal lip.

  5. INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

    Click here

  6. ADD AUTOMATIC TRANSMISSION FLUID

    Click here

  7. INSPECT FOR EXHAUST GAS LEAK