FOUR WHEEL DRIVE CONTROL SYSTEM INITIALIZATION


  1. DESCRIPTION


    1. When the 4WD ECU assembly is replaced with a normal one from another vehicle, it is necessary to perform initialization.

      Tech Tips

      When the 4WD ECU assembly is replaced with a new one, it is not necessary to perform initialization.

  2. PERFORM INITIALIZATION


    1. Turn the engine switch off.

    2. Connect the GTS to the DLC3.

    3. Turn the engine switch on (IG).

    4. Turn the GTS on.

    5. Enter the following menus: Chassis / Four Wheel Drive / Utility / Reset Memory.

    6. Operate the GTS to clear the data.