PARK / NEUTRAL POSITION SWITCH REMOVAL


  1. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. A01FELG

      Remove the clip and pin, and separate the floor shift gear shifting rod sub-assembly from the transmission control shaft lever RH.

  2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01FFP2

      Disconnect the park/neutral position switch assembly connector.

    2. A01FGPU

      Remove the nut, spring washer and transmission control shaft lever RH from the park/neutral position switch assembly.

    3. A01FEL2

      Using a screwdriver, pry out the lock washer.

    4. A01FGAJE01
      Text in Illustration
      *1 Lock Washer
      *2 Lock Nut

      Remove the lock nut and lock washer.

    5. A01FHJB

      Remove the bolt and park/neutral position switch assembly from the automatic transmission assembly.

      Tech Tips

      Make sure that the manual valve lever shaft has not been rotated prior to installing the park/neutral position switch assembly as the detent spring may become detached from the manual valve lever shaft.