ROCKER PANEL MOULDING REMOVAL

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT ROCKER PANEL MOULDING END COVER


    1. A01EYT4

      Remove the 2 screws and front rocker panel moulding end cover.

  2. REMOVE ROCKER PANEL MOULDING


    1. Apply protective tape around the rocker panel moulding and door as shown in the illustration.

      A01EWHJ
      Text in Illustration
      A01EVDL Protective Tape - -
    2. A01EX2N

      Remove the 2 screws and grommet.

    3. A01EWTE

      Remove the screw.

    4. A01ETPV

      Using a clip remover, remove the 7 clips.

    5. A01ETR1

      Remove the screw.

    6. A01EUXX

      Disengage the 10 clips and remove the rocker panel moulding.

    7. Remove the 10 clips from the rocker panel moulding.