FRONT BUMPER DISASSEMBLY


  1. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. A01ESSZ

      Extend the headlight washer washer nozzle sub-assembly.

    2. Disengage the 2 claws and remove the headlight washer washer nozzle sub-assembly.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  2. REMOVE HEADLIGHT WASHER NOZZLE SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY LH (w/ Headlight Cleaner System)


    1. A01EY31

      Slide the clip and disconnect the headlight cleaner hose.

    2. A01EXQX

      Remove the bolt.

    3. Push the tab (A) and disengage the claw and remove the headlight washer actuator sub-assembly as shown in the illustration.

      A01EVB2E01

      Tech Tips

      Use the same procedure for the RH side and LH side.

  4. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY RH (w/ Headlight Cleaner System)

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE HEADLIGHT CLEANER HOSE (w/ Headlight Cleaner System)


    1. A01EU78

      Disengage the 5 clamps and remove the headlight cleaner hose.

  6. REMOVE NO. 4 ENGINE ROOM WIRE (for TMC Made)


    1. w/ Fog Light without TOYOTA Parking Assist-sensor System:


      1. A01EX2Z

        Disconnect the connector.

      2. Disengage the clamp and remove the No.4 engine room wire.

        Tech Tips

        Use the same procedure for the RH side and LH side.

    2. w/ Fog Light and TOYOTA Parking Assist-sensor System:


      1. A01ET71

        Disconnect the 2 connectors.

      2. Disengage the clamp and remove the No.4 engine room wire.

        Tech Tips

        Use the same procedure for the RH side and LH side.

  7. REMOVE NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)


    1. for TMC Made:


      1. A01EW8IE01
        Text in Illustration
        *A LH Side
        *B RH Side

        Disconnect the connector.

    2. A01EVBZE01
      Text in Illustration
      *A LH Side
      *B RH Side

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

  8. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)


    1. A01EXSWE01
      Text in Illustration
      *A LH Side
      *B RH Side

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.

  9. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)


    1. for TMC Made:


      1. Disconnect the connector.

    2. A01EXKF

      Remove the screw.

    3. Disengage the 2 guides and remove the fog light assembly.

  10. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)

    Tech Tips

    Use the same procedure as for the LH side.

  11. REMOVE FRONT FENDER LINER RETAINER


    1. A01EWGZ

      Disengage the claw and remove the front fender liner retainer.

      Tech Tips

      Use the same procedure for the RH side and LH side.

  12. REMOVE RADIATOR GRILLE SUB-ASSEMBLY


    1. A01EYQN

      Disengage the 10 claws and remove the radiator grille sub-assembly.

  13. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY


    1. A01ETQK

      Disengage the 3 claws and guide to remove the radiator grille emblem assembly.

  14. REMOVE NO. 1 LOWER RADIATOR GRILLE


    1. A01EYZ2

      Disengage the 18 claws and remove the No. 1 lower radiator grille.

  15. REMOVE FRONT BUMPER HOLE COVER LH


    1. A01EV8V

      Remove the screw.

    2. Disengage the 4 claws and remove the front bumper hole cover LH.

  16. REMOVE FRONT BUMPER HOLE COVER RH

    Tech Tips

    Use the same procedure as for the LH side.

  17. REMOVE FRONT BUMPER EXTENSION MOUNTING BRACKET


    1. A01EY9U

      Remove the 2 screws.

    2. Disengage the 2 claws and remove the front bumper extension mounting bracket.

  18. REMOVE LOWER FRONT BUMPER COVER


    1. A01EWFYE01
      Text in Illustration
      *1 Hook

      Disengage the 2 claws.

    2. Disengage the hook and remove the lower front bumper cover.

  19. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. A01EXD0

      Disengage the 2 guides and remove the front bumper energy absorber.

  20. REMOVE FRONT BUMPER REINFORCEMENT SUB-ASSEMBLY


    1. A01EU69

      Disengage the 5 clamps.

    2. Remove the 6 bolts and front bumper reinforcement sub-assembly.

  21. REMOVE FRONT BUMPER SIDE RETAINER LH


    1. A01EWH2

      Remove the bolt and screw.

    2. Disengage the 2 claws and remove the front bumper side retainer LH.

  22. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure as for the LH side.