AFS OFF SWITCH INSTALLATION


  1. INSTALL HEADLIGHT SWIVEL MAIN SWITCH (AFS OFF SWITCH)


    1. Engage the 2 claws to install the headlight swivel main switch (AFS OFF switch).

  2. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY


    1. A01EUL7

      Temporarily install the instrument cluster finish panel assembly as shown in the illustration.

    2. Connect each connector.

    3. for LHD:


      1. Engage the 3 claws, 7 clips and 4 guides.

    4. for RHD:


      1. Engage the 4 claws, 5 clips and 4 guides.

    5. A01EWLV

      Engage the 4 clips and 2 guides to install the instrument cluster finish panel assembly.

  3. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01EWEJ

      Engage the 4 clips to install the No. 1 instrument panel register assembly.

  4. INSTALL INSTRUMENT SIDE PANEL


    1. Engage the 3 guides.

    2. A01ETDE

      Engage the 4 claws to install the instrument side panel LH as shown in the illustration.

  5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP


    1. A01EWEQE01
      Text in Illustration
      *1 Alignment Mark (Yellow)

      Align the alignment mark (Yellow) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.

      Note

      After installation, check that the corners fit correctly.

  6. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM (for Power Tilt and Power Telescopic Steering Column)

    Note

    Reset the auto away/return function setting to the previous condition by changing the customize parameter Click here.