REAR BUMPER REMOVAL


  1. REMOVE REAR BUMPER PLATE LH


    1. A01EW6XE01
      Text in Illustration
      *a Hook
      A01EVDL Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook and remove the rear bumper plate LH.

  2. REMOVE REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY


    1. A01ETF5

      Apply protective tape around the rear bumper assembly as shown in the illustration.

      Text in Illustration
      A01EVDL Protective Tape
    2. A01EXH1

      Remove the 6 screws.

    3. Using a clip remover, remove the 4 clips.

    4. A01EYXT

      Remove the 2 screws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A01EZ34

      Disengage the 7 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01EWM4

      Disengage the 6 claws as shown in the illustration.

    7. w/ TOYOTA Parking Assist-sensor System:


      1. Disconnect the connector.

    8. Remove the rear bumper assembly.