REAR BUMPER REMOVAL


  1. REMOVE REAR BUMPER PLATE LH


    1. A01EVEKE01
      Text in Illustration
      *1 Protective Tape
      *2 Hook

      Using a screwdriver with the tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook and remove the rear bumper plate LH.

  2. REMOVE REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY


    1. A01EWQ6E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper assembly.

    2. A01EVH2

      Using a clip remover, remove the 2 clips.

    3. Remove the 6 screws.

    4. A01EXXU

      Remove the 2 screws.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    5. A01EU5G

      Disengage the 7 claws as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01EY27

      Disengage the 6 claws as shown in the illustration.

    7. w/ TOYOTA Parking Assist-sensor System:


      1. Disconnect the connector.

    8. Remove the rear bumper assembly.