REAR LIGHT ASSEMBLY DISASSEMBLY

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE BACK-UP LIGHT BULB


    1. A01EVSW

      Turn the rear light socket and wire with the back-up light bulb as shown in the illustration to disconnect them as a unit.

    2. Remove the back-up light bulb from the rear light socket and wire.

  2. REMOVE NO. 1 REAR FOG LIGHT BULB (w/ Rear Fog Light)


    1. A01EVFV

      Turn the rear light socket and wire with the No. 1 rear fog light bulb as shown in the illustration to remove them as a unit.

    2. Remove the No. 1 rear fog light bulb from the rear light socket and wire.

  3. REMOVE REAR LIGHT SOCKET AND WIRE


    1. A01EXOT

      Disconnect connector to remove the rear light socket and wire.

  4. REMOVE REAR LIGHT GASKET


    1. A01EXYH

      Remove the rear light gasket.

      Note


      • Be sure to remove all the traces of the old gasket from the body.

      • Do not reuse the removed gasket. Be sure to install a new rear light gasket to prevent water ingress.