REAR COMBINATION LIGHT ASSEMBLY INSTALLATION

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. INSTALL REAR COMBINATION LIGHT ASSEMBLY


    1. Install the rear combination light assembly with the 4 nuts.

      Torque:
      4.1 N*m  { 42 kgf*cm, 36 in.*lbf }

    2. Engage the clamp.

    3. Connect each connector.

  2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER


    1. Install the 3 clips.

    2. Engage the fastener and install the luggage compartment inner trim cover LH.

  3. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. A01EU3EE01
      Text in Illustration
      *1 Pin

      Engage the pin to install the No. 1 luggage compartment trim hook.

  4. INSTALL REAR FLOOR FINISH PLATE


    1. A01EWNX

      Engage the 4 clips and install the rear floor finish plate.

    2. Install the 5 clips.

  5. INSTALL BAGGAGE HOLDER NET (w/ Partition Net)


    1. Install the baggage holder net.

  6. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.

  7. INSTALL REAR BUMPER ASSEMBLY

    Click here