REAR COMBINATION LIGHT ASSEMBLY DISASSEMBLY


  1. REMOVE REAR COMBINATION LIGHT PACKING


    1. A01EV0B

      Remove the rear combination light packing.

      Note


      • Be sure to remove all the traces of the old packing from the body.

      • Do not reuse the removed packing. Be sure to install a new rear combination light packing to prevent water ingress.

  2. REMOVE REAR TURN SIGNAL LIGHT BULB


    1. A01EV5D

      Turn the rear turn signal light socket with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the rear turn signal light bulb from the rear turn signal light socket.

  3. REMOVE TAIL AND STOP LIGHT BULB


    1. A01EVZJ

      Turn the tail and stop light socket with the tail and stop light bulb in the direction indicated by the arrow shown in the illustration, and remove them as a unit.

    2. Remove the tail and stop light bulb from the tail and stop light socket.

  4. REMOVE REAR BUMPER UPPER SIDE RETAINER


    1. A01EVRU

      Using a screwdriver, disengage the claw and remove the rear bumper upper side retainer as shown in the illustration.

  5. REMOVE REAR COMBINATION LIGHT BRACKET


    1. A01EUCP

      Remove the 2 screws and rear combination light bracket.