REAR COMBINATION LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


    1. Remove the luggage compartment floor mat.

  3. REMOVE BAGGAGE HOLDER NET (w/ Partition Net)


    1. Remove the baggage holder net.

  4. REMOVE REAR FLOOR FINISH PLATE


    1. A01EY0R

      Remove the 5 clips.

    2. A01EYEN

      Disengage the 4 clips and remove the rear floor finish plate.

  5. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK


    1. A01EULLE01
      Text in Illustration
      *1 Pin

      Push the pin and remove the No. 1 luggage compartment trim hook.

  6. REMOVE LUGGAGE COMPARTMENT INNER TRIM COVER


    1. A01EU4O

      Remove the 3 clips.

    2. Disengage the fastener and remove the luggage compartment inner trim cover LH.

  7. REMOVE REAR COMBINATION LIGHT ASSEMBLY


    1. A01EVF0

      Disconnect each connector.

    2. Disengage the clamp.

    3. A01ETEY

      Remove the 4 nuts and rear combination light assembly.