AUTOMATIC HIGH BEAM SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE AUTOMATIC HIGH BEAM SYSTEM

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following item can be customized.


    1. Customizing with the GTS


      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Light Control.

      5. Select the setting by referring to the table below.

        Light Control
        Display Default Content Setting Relevant ECU
        Automatic High Beam On Enabling (On) or disabling (Off) of the automatic high beam function On or Off Main Body ECU (Multiplex Network Body ECU)