FRONT SEAT ASSEMBLY (for Power Seat) REASSEMBLY


  1. INSTALL SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. Engage the 4 guides to install the separate type front seatback spring assembly.

    2. Install the 4 bolts.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

  2. INSTALL FRONT NO. 2 SEAT WIRE


    1. Connect the connectors and engage the wire harness clamps to install the front No. 2 seat wire.

  3. INSTALL FRONT SEAT WIRE


    1. Connect the connectors and engage the wire harness clamps to install the front seat wire.

  4. INSTALL SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


    1. Engage the 2 clamps to install the seat heater control sub-assembly.

    2. Connect the connector.

  5. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)


    1. Engage the 3 claws to install the front seat cushion edge protector LH.

    2. Install the screw.

  6. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)


    1. Engage the 3 claws to install the front seat cushion edge protector RH.

    2. Install the screw.

  7. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)


    1. Engage the 3 claws to install the front seat cushion edge protector LH.

    2. Install the screw.

  8. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)


    1. Engage the 3 claws to install the front seat cushion edge protector RH.

    2. Install the screw.

  9. INSTALL RECLINING ADJUSTER INSIDE COVER LH


    1. Engage the 2 guides to install the reclining adjuster inside cover LH.

  10. INSTALL RECLINING ADJUSTER INSIDE COVER RH


    1. Engage the 2 guides to install the reclining adjuster inside cover RH.

  11. INSTALL FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. A01EY2Y

      Engage the clip to install the front seat lower cushion shield LH.

    2. Engage the hook as shown in the illustration.

    3. Install the screw.

  12. INSTALL FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    1. A01EXHO

      Engage the clip to install the front seat lower cushion shield RH.

    2. Engage the hook as shown in the illustration.

    3. Install the screw.

  13. INSTALL SEPARATE TYPE FRONT SEATBACK COVER


    1. A01EUSC

      Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with 6 new hog rings.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  14. INSTALL FRONT SEAT AIRBAG ASSEMBLY

    CAUTION:


    • The nuts must not be reused.

    • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.


    1. Install the front seat airbag assembly with 2 new nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Engage the 2 clamps.

  15. INSTALL SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. Temporarily install the separate type front seatback cover with pad.

    2. Engage the 4 claws to install the 2 front seat headrest supports.

    3. Install the 2 brackets with the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      CAUTION:


      • For vehicles with a front seat airbag assembly, the separate type front seatback cover must be securely installed. Otherwise, the front seat airbag assembly may not deploy properly.

      • Make sure that the strap is not twisted after installing the nut.

      • Install the bracket securely.

    4. A01EX62

      Turn back the separate type front seatback cover.

    5. Using hog ring pliers, install the 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    6. A01EY2O

      Using hog ring pliers, install 3 new hog rings.

      Note

      When installing the hog rings, take care to minimize wrinkles as much as possible.

    7. A01EUTJ

      Using hog ring pliers, install 5 new hog rings.

      Note


      • Be careful not to damage the separate type front seatback cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  16. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01EVWF

      Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 16 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

    2. A01EWK9

      Using hog ring pliers, install 2 new hog rings.

      Note


      • Be careful not to damage the separate type front seat cushion cover.

      • When installing the hog rings, take care to minimize wrinkles as much as possible.

  17. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. Temporarily install the separate type front seat cushion cover with pad.

    2. Engage each hook.

    3. w/ Seat Heater System:


      1. Engage the 2 clamps to install the seat heater wire harness.

      2. Connect the connector.

      3. Engage the clamp.

      4. Connect the connector.

    4. Engage the claw and 3 clamps to install the front seat airbag assembly wire harness.

    5. Engage the fastener to secure the front seat airbag assembly wire harness.

  18. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. A01ESS8E01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the front seat adjuster.

    2. Engage the clamp.

    3. Engage each clamp under the front seat assembly.

  19. INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A01EYH6E01
      Text in Illustration
      *1 Protruding Part

      Install the front seat inner belt assembly with the nut.

      Torque:
      42 N*m  { 428 kgf*cm, 31 ft.*lbf }

      Note

      Do not allow the anchor parts of the front seat inner belt assembly to overlap the protruding parts of the front seat adjuster.

  20. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. Engage the 5 claws and 6 guides to install the front seat inner cushion shield.

  21. INSTALL FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. Engage the 5 claws and 7 guides to install the front seat inner cushion shield.

  22. INSTALL FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)


    1. Engage the 4 claws to install the front lumbar power seat switch to the front seat cushion shield.

  23. INSTALL FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)


    1. Install the front power seat switch to the front seat cushion shield with the 3 screws.

  24. INSTALL POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System)


    1. Install the position control ECU and switch assembly to the front seat cushion shield LH with the 3 screws.

  25. INSTALL FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. Connect the front lumbar power seat switch connector.

    2. Connect the front power seat switch connector.

    3. Engage the 2 wire harness clamps.

    4. Install the wire harness to the wire harness cover.

    5. Engage the 2 claws to close the wire harness cover.

    6. Engage the 4 claws, 7 guides and clip to install the front seat cushion shield.

  26. INSTALL FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. Connect the front power seat switch connector.

    2. Engage the 2 wire harness clamps.

    3. Install the wire harness to the wire harness cover.

    4. Engage the 3 claws to close the wire harness cover.

    5. Engage the 4 claws, 8 guides and clip to install the front seat cushion shield.

  27. INSTALL FRONT NO. 1 SEAT INNER CUSHION SHIELD


    1. A01EXRS

      Install the clip.

    2. A01ESP3

      Engage the 3 claws and 3 guides to install the front No. 1 seat inner cushion shield as shown in the illustration.

    3. A01EXK7

      Engage the 2 claws to install the front No. 1 seat inner cushion shield to the clip as shown in the illustration.

    4. Install the screw.

  28. CONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. Connect the rubber band of the separate type front seatback cover.

  29. INSTALL RECLINING POWER SEAT SWITCH KNOB


    1. Engage the 4 claws to install the reclining power seat switch knob.

  30. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. Engage the 4 claws to install the slide and vertical power seat switch knob.

  31. INSTALL SEAT ADJUSTER COVER CAP


    1. Install the 2 seat adjuster cover caps.