FRONT SEAT ASSEMBLY (for Power Seat) DISASSEMBLY


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. A01EUYY

      Remove the 2 seat adjuster cover caps.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01EVPA

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01EXGF

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01ETH6

      Disconnect the rubber band of the separate type front seatback cover.

  5. REMOVE FRONT NO. 1 SEAT INNER CUSHION SHIELD


    1. A01EYG7

      Remove the screw.

    2. Disengage the 2 claws to remove the front No. 1 seat inner cushion shield from the clip as shown in the illustration.

    3. A01EZ4E

      Disengage the 3 claws and 3 guides to remove the front No. 1 seat inner cushion shield as shown in the illustration.

    4. A01EXRS

      Using a clip remover, remove the clip.

  6. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. A01EY50

      Disengage the 4 claws, 7 guides and clip to remove the front seat cushion shield.

    2. A01EWY2E01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 2 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

    6. A01ETV9

      Disconnect the front lumbar power seat switch connector.

  7. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. A01EVXS

      Disengage the 4 claws, 8 guides and clip to remove the front seat cushion shield.

    2. A01EWXIE01
      Text in Illustration
      *1 Wire Harness Cover

      Disengage the 3 claws and open the wire harness cover.

    3. Remove the wire harness from the wire harness cover.

    4. Disengage the 2 wire harness clamps.

    5. Disconnect the front power seat switch connector.

  8. REMOVE FRONT POWER SEAT SWITCH (w/o Seat Position Memory System)


    1. A01EUCU

      Remove the 3 screws and front power seat switch from the front seat cushion shield.

  9. REMOVE POSITION CONTROL ECU AND SWITCH ASSEMBLY (w/ Seat Position Memory System)


    1. A01EY3D

      Remove the 3 screws and position control ECU and switch assembly from the front seat cushion shield LH.

  10. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)


    1. A01EX8N

      Disengage the 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.

  11. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. A01EVEW

      Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.

  12. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. A01EWNL

      Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.

  13. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. Disengage each clamp under the front seat assembly.

    2. A01EV6C

      Disengage the clamp.

    3. Remove the nut and front seat inner belt assembly.

  14. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A01EWWT

      Remove the nut and front seat inner belt assembly.

  15. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A01ESUG

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. A01EV1G

      Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.

    3. w/ Seat Heater System:


      1. A01ETYS

        Disconnect the connector.

      2. Disengage the clamp.

      3. A01EX1Y

        Disconnect the connector.

      4. Disengage the 2 clamps to separate the seat heater wire harness.

    4. A01EYN3

      Disengage the hook.

    5. A01EVTY

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  16. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01ETLL

      Remove the 2 hog rings.

    2. A01EW6P

      Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  17. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01EYFA

      Remove the 5 hog rings.

    2. A01ETQN

      Remove the 3 hog rings.

    3. A01ESWB

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. A01EXF9

      Remove the nut and the 2 brackets.

    6. A01EVF9

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  18. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01EVAZ

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  19. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01EWF3

      Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.

  20. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. A01ESWK

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield LH.

  21. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    1. A01EW5G

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield RH.

  22. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. A01EULK

      Disengage the 2 guides to remove the reclining adjuster inside cover LH.

  23. REMOVE RECLINING ADJUSTER INSIDE COVER RH


    1. A01EWMK

      Disengage the 2 guides to remove the reclining adjuster inside cover RH.

  24. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)


    1. A01EW19

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  25. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)


    1. A01EYR1

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  26. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)


    1. A01ET56

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  27. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)


    1. A01EU4D

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  28. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


    1. A01EVJE

      Disconnect the connector.

    2. Disengage the 2 clamps and remove the seat heater control sub-assembly.

  29. REMOVE FRONT SEAT WIRE


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front seat wire.

  30. REMOVE FRONT NO. 2 SEAT WIRE


    1. Disconnect the connectors and disengage the wire harness clamps to remove the front No. 2 seat wire.

  31. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. A01ET93

      Remove the 4 bolts

    2. Disengage the 4 guides to remove the separate type front seatback spring assembly.