FRONT SEAT ASSEMBLY (for Manual Seat) DISASSEMBLY


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. A01EY69

      Remove the 2 seat adjuster cover caps.

  2. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    1. A01ETBME01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the reclining adjuster release handle.

  3. REMOVE VERTICAL ADJUSTING HANDLE (for Driver Side)


    1. A01EWZY

      Remove the screw and vertical adjusting handle.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01EW4M

      Disconnect the rubber band of the separate type front seatback cover.

  5. REMOVE FRONT SEAT CUSHION SHIELD (for Driver Side)


    1. A01EX4H

      Remove the screw.

    2. Disengage the 5 claws, 6 guides and clip to remove the front seat cushion shield.

  6. REMOVE FRONT SEAT CUSHION SHIELD (for Front Passenger Side)


    1. A01EWTW

      Remove the screw.

    2. Disengage the 5 claws, 7 guides and clip to remove the front seat cushion shield.

  7. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Driver Side)


    1. A01EVEW

      Disengage the 5 claws and 6 guides to remove the front seat inner cushion shield.

  8. REMOVE FRONT SEAT INNER CUSHION SHIELD (for Front Passenger Side)


    1. A01EWNL

      Disengage the 5 claws and 7 guides to remove the front seat inner cushion shield.

  9. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)


    1. Disengage each clamp under the front seat assembly.

    2. A01EV6C

      Disengage the clamp.

    3. Remove the nut and front seat inner belt assembly.

  10. REMOVE FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)


    1. A01EWWT

      Remove the nut and front seat inner belt assembly.

  11. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A01ETP8

      Disengage the fastener and separate the front seat airbag assembly wire harness.

    2. A01EVAA

      Disengage the claw and 3 clamps to separate the front seat airbag assembly wire harness.

    3. A01EU2F

      Disengage the hook.

    4. A01EUR6

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01ETLL

      Remove the 2 hog rings.

    2. A01EVA4

      Remove the 16 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  13. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01ETC0

      Remove the 5 hog rings.

    2. A01EV36

      Remove the 3 hog rings.

    3. A01ESWB

      Remove the 2 hog rings.

    4. Turn back the separate type front seatback cover.

    5. A01EXIB

      Remove the nut and the 2 brackets.

    6. A01EVF9

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    7. Remove the separate type front seatback cover with pad.

  14. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01EVAZ

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01EWF3

      Remove the 6 hog rings and separate type front seatback cover from the separate type front seatback pad.

  16. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. A01EX4I

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield LH.

  17. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    1. A01ESU5

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the clip and remove the front seat lower cushion shield RH.

  18. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    1. A01ESY9

      Disengage the guide and remove the reclining adjuster inside cover LH.

  19. REMOVE RECLINING ADJUSTER INSIDE COVER RH


    1. A01EW2W

      Disengage the guide and remove the reclining adjuster inside cover RH.

  20. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side)


    1. A01EW91

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  21. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Driver Side)


    1. A01EZ31

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  22. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Front Passenger Side)


    1. A01EWN2

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector LH.

  23. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side)


    1. A01EV30

      Remove the screw.

    2. Disengage the 3 claws to remove the front seat cushion edge protector RH.

  24. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY


    1. A01EXTS

      Remove the 4 bolts.

    2. Disengage the 4 guides to remove the separate type front seatback spring assembly.

  25. REMOVE SEAT TRACK ADJUSTING HANDLE


    1. A01EYLS

      Disengage the 2 springs to remove the seat track adjusting handle.