CURTAIN SHIELD AIRBAG ASSEMBLY ON-VEHICLE INSPECTION

INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)

1. Perform a diagnostic system check.

   for Separate Type Yaw Rate Sensor: Click here

   for Built-in Type Yaw Rate Sensor: Click here

2. Visually check for defects with the curtain shield airbag assemblies installed on the vehicle.

   Tech Tips

   The defects are as follows:

   
   

   • Cuts on each pillar garnish or the roof headlining around the curtain shield airbag assemblies

   • Small cracks on each pillar garnish or the roof headlining around the curtain shield airbag assemblies

   • Significant discoloration on each pillar garnish or the roof headlining around the curtain shield airbag assemblies

   OK
   No defects are found.

   If any of the defects is found, replace each pillar garnish or the roof headlining with a new one.

INSPECT CURTAIN SHIELD AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)

1. Perform a diagnostic system check.

   for Separate Type Yaw Rate Sensor: Click here

   for Built-in Type Yaw Rate Sensor: Click here

2. Visually check for defects with the curtain shield airbag assemblies removed from the vehicle.

   Tech Tips

   The defects are as follows:

   
   

   • Cuts

   • Small cracks

   • Significant discoloration

   • Cracks or other damage to the connector

   OK
   No defects are found.

   If any of the defects is found, replace the curtain shield airbag assembly with a new one.