CLOCK INSTALLATION


  1. INSTALL CLOCK ASSEMBLY


    1. Engage the 6 claws to install the clock assembly.

    2. Install the clock assembly with No. 2 bezel with the 2 screws.

  2. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. Connect the connector.

    2. A01ETDJ

      Engage the 4 clips to install the No. 2 instrument panel register assembly.

      Note

      When installing the No. 2 instrument panel register assembly, check that the wire harness is not caught between the No. 2 instrument panel register assembly and duct.

  3. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01EWUZ

      Engage the 7 clips and 2 guides to install the center instrument cluster finish panel sub-assembly.

  4. ADJUST CLOCK