CLOCK REMOVAL


  1. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01ETO0

      Using a moulding remover, pry up on the center instrument cluster finish panel sub-assembly until there is enough of a gap to make it possible to pull on the panel by hand.

    2. A01EVW2

      Pull the center instrument cluster finish panel sub-assembly in the direction indicated by the arrow to disengage the 7 clips and 2 guides to remove the center instrument cluster finish panel sub-assembly as shown in the illustration.

  2. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01EUQP

      Pull the No. 2 instrument panel register assembly in the direction indicated by the arrow to disengage the 4 clips as shown in the illustration.

    2. Disconnect the connector to remove the No. 2 instrument panel register assembly.

  3. REMOVE CLOCK ASSEMBLY


    1. A01EX9J

      Remove the 2 screws and clock assembly with No. 2 bezel.

    2. A01ETK8

      Disengage the 6 claws and remove the clock assembly.