IGNITION KEY CYLINDER LIGHT INSTALLATION


  1. INSTALL TRANSPONDER KEY COIL


    1. Connect the connector to the transponder key coil.

    2. A01EYAL

      Engage the 2 claws and install the transponder key coil.

  2. INSTALL LOWER STEERING COLUMN COVER

    Note

    If the lower steering column cover is installed in the incorrect order, it will not be possible to assemble the steering column cover.


    1. Engage the 2 claws.

    2. A01EWMT

      Engage the 2 claws.

      Tech Tips

      Press the area around the claws to engage them.

    3. Turn the steering wheel assembly to the left and install the screw.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

    4. Turn the steering wheel assembly to the right and install the lower steering column cover with the screw.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }