FRONT DOOR LOCK INSPECTION


  1. INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH


    1. A01ET5DE21
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly LH)
      *b Unlock
      *c Lock

      Check the operation of the door lock motor.


      1. Apply battery voltage and check the operation of the door lock motor.

        OK
        Connection Result

        Battery positive (+) → Terminal 4 (L)

        Battery negative (-) → Terminal 1 (UL)

        		 Locks

        Battery positive (+) → Terminal 1 (UL)

        Battery negative (-) → Terminal 4 (L)

        		 Unlocks

        If the result is not as specified, replace the front door lock with motor assembly LH.

    2. A01ET5DE22
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly LH)
      *b Unlock
      *c Lock

      Check the operation of the door unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (E) - 8 (LSSR) Locked 10 kΩ or higher
        7 (E) - 8 (LSSR) Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock with motor assembly LH.

    3. A01EX2CE01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly LH)
      *b Unlock
      *c Lock

      Check the operation of the door key lock and unlock switch. (for LHD)


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        9 (L) - 7 (E) Locked Below 1 Ω
        9 (L) - 7 (E) off 10 kΩ or higher
        10 (UL) - 7 (E) Unlocked Below 1 Ω
        10 (UL) - 7 (E) off 10 kΩ or higher

        If the result is not as specified, replace the front door lock with motor assembly LH.

  2. INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY RH


    1. A01EXEBE23
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly RH)
      *b Unlock
      *c Lock

      Check the operation of the door lock motor.


      1. Apply battery voltage and check the operation of the door lock motor.

        OK
        Connection Result

        Battery positive (+) → Terminal 4 (L)

        Battery negative (-) → Terminal 1 (UL)

        		 Locks

        Battery positive (+) → Terminal 1 (UL)

        Battery negative (-) → Terminal 4 (L)

        		 Unlocks

        If the result is not as specified, replace the front door lock with motor assembly RH.

    2. A01EUBFE01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly RH)
      *b Unlock
      *c Lock

      Check the operation of the door unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        7 (LSSR) - 8 (E) Locked 10 kΩ or higher
        7 (LSSR) - 8 (E) Unlocked Below 1 Ω

        If the result is not as specified, replace the front door lock with motor assembly RH.

    3. A01ET8PE04
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Lock with Motor Assembly RH)
      *b Unlock
      *c Lock

      Check the operation of the door key lock and unlock switch (for RHD).


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (L) - 8 (E) Locked Below 1 Ω
        6 (L) - 8 (E) off 10 kΩ or higher
        5 (UL) - 8 (E) Unlocked Below 1 Ω
        5 (UL) - 8 (E) off 10 kΩ or higher

        If the result is not as specified, replace the front door lock with motor assembly RH.