DOOR CONTROL TRANSMITTER (w/o Smart Entry and Start System) REMOVAL


  1. REMOVE TRANSMITTER HOUSING COVER (for Type A)

    Note

    Take extra care when handling these precision electronic components.


    1. A01EZ02E01
      Text in Illustration
      *a Protective Tape

      Insert a precision screwdriver into the gap, and turn the screwdriver to remove the transmitter housing cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE DOOR CONTROL TRANSMITTER PACKING (for Type A)


    1. A01EY6PE01
      Text in Illustration
      *a Protective Tape

      Insert a precision screwdriver into the door control transmitter packing and turn the screwdriver to remove the door control transmitter packing.

      Tech Tips

      Tape the screwdriver tip before use.

  3. REMOVE TRANSMITTER BATTERY (for Type A)


    1. A01EV1OE01
      Text in Illustration
      *1 Protective Tape

      Insert a precision screwdriver into the gap and gently remove the transmitter battery (lithium battery: CR1620).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery as the terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Moisture may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.

      Tech Tips

      Tape the screwdriver tip before use.

  4. REMOVE TRANSMITTER HOUSING COVER (for Type B)


    1. A01ETHME02
      Text in Illustration
      *a Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

      Note

      Do not forcibly pry the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  5. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY (for Type B)


    1. A01EXKTE02
      Text in Illustration
      *a Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.

      Note

      Handle each part with care as they are delicate electrical parts.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE TRANSMITTER BATTERY (for Type B)


    1. A01EYG1

      Twist the coin in the direction of the arrow in the illustration, and remove the transmitter battery cover.

    2. A01ETRN

      Remove the transmitter battery (lithium battery: CR2016).

      Note


      • Do not push the terminals with your finger.

      • Do not forcibly pry up the transmitter battery. The terminals may be damaged.

      • Do not touch the transmitter battery with wet hands. Water may cause rust.

      • Do not touch or move any components inside the transmitter. It may interfere with proper operation.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical transmitter from being damaged.