DOOR CONTROL TRANSMITTER (w/o Smart Entry and Start System) REMOVAL


  1. REMOVE TRANSMITTER HOUSING COVER


    1. A01ETHME01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, pry open the transmitter housing cover.

      Note

      Do not forcibly pry the cover.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE DOOR CONTROL TRANSMITTER MODULE SET SUB-ASSEMBLY


    1. A01EXKTE01
      Text in Illustration
      *1 Protective Tape

      Using a precision screwdriver with its tip wrapped in protective tape, remove the door control transmitter module set sub-assembly from the transmitter housing case.

      Note

      Handle each part with care as they are delicate electrical parts.

      Tech Tips

      Tape the screwdriver tip before use.