WIRELESS DOOR LOCK CONTROL SYSTEM (w/ Smart Entry and Start System) DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Data List.

    5. Read the Data List according to the display on the intelligent tester.

      Main Body (Main Body ECU (Multiplex Network Body ECU))
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      ACC SW Engine switch ACC signal/ON or OFF

      ON: Engine switch on (ACC)

      OFF: Engine switch off

      		 -
      IG SW Engine switch IG signal/ON or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 -
      RR Door Courtesy SW Rear door courtesy light switch RH signal/ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW Rear door courtesy light switch LH signal/ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      FR Door Lock Pos Front door RH unlock detection switch signal/LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy Front door courtesy light switch RH signal/ON or OFF

      ON: Front door RH closed

      OFF: Front door RH open

      		 -
      FL Door Lock Pos Front door LH unlock detection switch signal/LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy Front door courtesy light switch LH signal/ON or OFF

      ON: Front door LH closed

      OFF: Front door LH open

      		 -
      RR-Door Lock Pos SW Rear door RH and LH unlock detection switch signal/ON or OFF

      ON: Rear door RH or LH unlocked

      OFF: Rear door RH and LH locked

      		 -
      RL-Door Lock Pos SW Rear door RH and LH unlock detection switch signal/ON or OFF

      ON: Rear door RH or LH unlocked

      OFF: Rear door RH and LH locked

      		 -
      Wireless Control Wireless door lock control function/ON or OFF Customization status displayed -
      Hazard Answer Back Hazard answer-back of wireless/ON or OFF Customization status displayed -
      Open Door Warning Open door warning/ON or OFF Customization status displayed -
      Unlock 2 Operation 2 times operation of wireless unlock/ON or OFF Customization status displayed -
      Auto Lock Time Automatic lock time/120 s, 60 s or 30 s Customization status displayed -
      Wireless Buzzer Resp* Buzzer answer-back of wireless/ON or OFF Customization status displayed -
      P/W Wireless Ope Buzz Buzzer sounds of wireless power window/ON or OFF Customization status displayed -
      Wireless Buzzer Vol* Wireless door lock buzzer volume/Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0 Customization status displayed -
      Trunk Lid Operation Opening the luggage compartment door by the electrical key transmitter sub-assembly/1 tim ON, 2 tim ON, Long1, Long2 or Prohibit Customization status displayed -

      • *: w/ Wireless Door Lock Buzzer Answer Back Function

  2. ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Active Test.

    5. Perform the Active Test according to the display on the intelligent tester.

      Main Body (Main Body ECU (Multiplex Network Body ECU))
      Tester Display Test Part Control Range Diagnostic Note
      Illuminated Entry System Interior lights (Interior light switch is in door position and all doors are closed) OFF/ON -
      Door Lock Door lock motor Unlock/Lock -
      Trunk and Back-Door Open Luggage door lock motor OFF/ON -
      Wireless Buzzer Wireless door lock buzzer OFF/ON -