LIN COMMUNICATION SYSTEM PRECAUTION


  1. PRECAUTION FOR DISCONNECTING THE BATTERY CABLE

    Note

    When disconnecting the battery negative (-) cable, initialize the following system after the cable is reconnected

    System Name See Procedure
    Parking Assist Monitor System

    Click here

  2. PRECAUTIONS WHEN USING INTELLIGENT TESTER


    1. When using the intelligent tester to troubleshoot with the ignition switch off:

      Connect the intelligent tester to the DLC3, and turn the courtesy light switch on and off at 1.5-second intervals until communication between the intelligent tester and vehicle begins.

    2. After all DTCs are cleared, check if the trouble occurs again 6 seconds after the ignition switch is turned to ON.

  3. IGNITION SWITCH EXPRESSIONS


    1. The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

      Expression Ignition Switch (Position) Engine Switch (Condition)
      Ignition Switch off LOCK Off
      Ignition Switch ACC ACC On (ACC)
      Ignition Switch ON ON On (IG)
      Engine Start START Start