ULTRASONIC SENSOR (for Front Side) INSTALLATION


  1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER


    1. A01EU6KE01
      Text in Illustration
      *A LH Side
      *B RH Side
      *a Keyhole
      *b Snap

      Engage the 2 claws to install the No. 1 ultrasonic sensor retainer to the front bumper assembly.

      Note


      • Do not damage the front bumper with the protrusion when installing the retainer.

      • Securely install the No. 1 ultrasonic sensor retainer so that there are no gaps between the retainer and surface of the front bumper.

      Tech Tips


      • When installing the retainer, align the keyhole and snap as shown in the illustration.

  2. INSTALL NO. 1 ULTRASONIC SENSOR


    1. A01EVBZE01
      Text in Illustration
      *A LH Side
      *B RH Side

      Engage the 2 claws to install the No. 1 ultrasonic sensor to the No. 1 ultrasonic sensor retainer.

      Note

      Push the No. 1 ultrasonic sensor retainer from the outside of the bumper when there is a gap between the retainer and the bumper surface. In this case, do not push on the ultrasonic sensor.

    2. for TMC Made:


      1. A01EW8IE01
        Text in Illustration
        *A LH Side
        *B RH Side

        Connect the connector.

  3. INSTALL FRONT BUMPER ASSEMBLY

    Click here