ULTRASONIC SENSOR (for Front Side) REMOVAL


  1. REMOVE FRONT BUMPER ASSEMBLY

    Click here

  2. REMOVE NO. 1 ULTRASONIC SENSOR

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensors.


    1. A01EVFT

      Disconnect the connector.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

    2. A01EW6F

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.

  3. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER

    Tech Tips

    Use the same procedure for all No. 1 ultrasonic sensor retainers.


    1. A01EVWV

      Disengage the 2 claws to remove the No. 1 ultrasonic sensor retainer from the front bumper assembly.

      Tech Tips

      This illustration is for the LH side. The orientation for the RH side is the opposite of the LH side.