CLEARANCE WARNING BUZZER REMOVAL


  1. REMOVE FRONT PANEL GARNISH LH


    1. A01EXDU

      Disengage the 3 clips and 8 guides to remove the front panel garnish LH as shown in the illustration.

  2. REMOVE FRONT PANEL GARNISH RH


    1. A01EYBQ

      Disengage the 3 clips and 8 guides to remove the front panel garnish RH.

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01EYT0

      Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.

  4. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. Disengage the 6 clips as shown in the illustration.

      A01EV3G

    3. Disconnect each connector to remove the rear console upper panel sub-assembly.

  5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


    1. for Blank Type:


      1. A01EVN1

        Disengage the 2 claws and remove the front console upper panel garnish as shown in the illustration.

    2. for 3 Switch Hole Type:


      1. A01EY7R

        Disengage the 2 claws as shown in the illustration.

      2. Disconnect the each connector to remove the front console upper panel garnish.

  6. REMOVE FRONT ASH RECEPTACLE ASSEMBLY


    1. A01EY0X

      Remove the 2 screws <C>.

    2. A01EX36

      Disengage the 2 clips as shown in the illustration.

    3. Disconnect each connector to remove the front ash receptacle assembly.

  7. REMOVE NO. 1 CLEARANCE WARNING BUZZER


    1. A01EYDK

      Disconnect the connector.

    2. Disengage the clamp to remove the No. 1 clearance warning buzzer.