CLEARANCE WARNING ECU INSTALLATION


  1. INSTALL CLEARANCE WARNING ECU ASSEMBLY


    1. Engage the 2 claws to install the clearance warning ECU assembly.

  2. INSTALL ECU INTEGRATION BOX RH


    1. Install the ECU integration box RH with the 2 nuts and bolt.

      Torque:
      Bolt
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }
      Nut
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Connect each connector.

  3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD)


    1. A01ET5P

      Engage the 2 clips and 4 guides.

    2. Install the 3 screws <C>.

    3. Close the lower instrument panel door.

    4. Install the lower instrument panel sub-assembly with the bolt <B> and screws <C>.

  4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LHD)


    1. Connect the connector.

    2. Engage the 2 guides and 4 claws to install the No. 2 instrument panel under cover sub-assembly.

  5. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for RHD)


    1. w/o Driver Side Knee Airbag:


      1. Engage the 5 clips and 3 guides.

    2. w/ Driver Side Knee Airbag:


      1. Engage the 4 claws, 7 clips and 3 guides.

    3. Install the instrument panel sub-assembly with the 2 bolts <B>.

  6. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY (for RHD)


    1. Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.

  7. INSTALL UPPER INSTRUMENT PANEL FINISH PANEL (for RHD)


    1. w/ Smart Entry and Start System:


      1. Connect the connector.

    2. A01EYSK

      Engage the 2 claws and 4 clips to install the upper instrument panel finish panel.

  8. INSTALL FRONT PANEL GARNISH RH


    1. A01EYF4

      Engage the 3 clips and 8 guides to install the front panel garnish RH.

  9. INSTALL INSTRUMENT SIDE PANEL RH


    1. A01ETKO

      Engage the 3 guides as shown in the illustration.

    2. A01EXPG

      Engage the 4 claws to install the instrument side panel RH as shown in the illustration.

  10. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH


    1. A01EXCIE01
      Text in Illustration
      *1 Alignment Mark (White)

      Align the alignment mark (White) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip RH.

      Note

      After installation, check that the corners fit correctly.

  11. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  12. INSTALL FRONT DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side Click here.

  13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.