BLIND SPOT MONITOR SENSOR REMOVAL


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH

    Note

    Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.


    1. A01ET3D

      Disengage the 2 clamps.

    2. A01EUKS

      Remove the 3 nuts.

    3. A01EXSX

      Disconnect the connector to remove the blind spot monitor sensor LH.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH

    Note

    Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.


    1. A01EV25

      Disengage the clamp.

    2. A01EWBW

      Remove the 3 nuts.

    3. A01ESVR

      Disconnect the connector to remove the blind spot monitor sensor RH.

  4. REMOVE BLIND SPOT MONITOR COVER LH


    1. A01ESV4

      Remove the 2 nuts.

    2. Disengage the claw to remove the blind spot monitor cover LH.

  5. REMOVE BLIND SPOT MONITOR COVER RH

    Tech Tips

    Use the same procedure as for the LH side.