BLIND SPOT MONITOR SENSOR INSTALLATION

INSTALL BLIND SPOT MONITOR COVER LH
1. Engage the claw.
2. Install the blind spot monitor cover LH with the 2 nuts.
  
  Torque:
  
  10 N*m { 102 kgf*cm, 7 ft.*lbf }
INSTALL BLIND SPOT MONITOR COVER RH

Tech Tips

Use the same procedure as for the LH side.
INSTALL BLIND SPOT MONITOR SENSOR LH

Note

Replace the blind spot monitor sensor LH if it has been dropped or subjected to a severe impact.
1. Connect the connector.
2. Install the blind spot monitor sensor LH with the 3 nuts.
  
  Torque:
  
  10 N*m { 102 kgf*cm, 7 ft.*lbf }
3. Engage the 2 clamps.
INSTALL BLIND SPOT MONITOR SENSOR RH

Note

Replace the blind spot monitor sensor RH if it has been dropped or subjected to a severe impact.
1. Connect the connector.
2. Install the blind spot monitor sensor RH with the 3 nuts.
  
  Torque:
  
  10 N*m { 102 kgf*cm, 7 ft.*lbf }
3. Engage the clamp.
INSTALL REAR BUMPER ASSEMBLY

Click here
PERFORM BLIND SPOT MONITOR BEAM AXIS INSPECTION

Click here
PERFORM BLIND SPOT MONITOR BEAM AXIS CONFIRMATION

Click here

SST

09870-60000 ( 09870-60010 )

09870-60040
PERFORM DIAGNOSTIC SYSTEM CHECK

Click here