PARKING ASSIST MONITOR SYSTEM DTC CHECK / CLEAR


  1. CHECK DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Navigation System / Trouble Codes.

    5. Check for DTCs and then write them down.

    6. Check for DTCs Click here.

      Note

      The navigation system outputs DTCs for the following system. When DTCs other than those in Diagnostic Trouble Code Chart for the navigation system are output, refer to Diagnostic Trouble Code Chart for the relevant system.

      System Proceed to
      Navigation system

      Click here

  2. CLEAR DTC


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Navigation System / Trouble Codes.

    5. Clear the DTCs.