NAVIGATION ECU REMOVAL


  1. REMOVE FRONT PANEL GARNISH LH


    1. A01EYSY

      Disengage the 3 clips and 8 guides to remove the front panel garnish LH as shown in the illustration.

  2. REMOVE FRONT PANEL GARNISH RH


    1. A01EYHF

      Disengage the 3 clips and 8 guides to remove the front panel garnish RH.

  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY


    1. A01ETO0

      Using a moulding remover, pry up on the center instrument cluster finish panel sub-assembly until there is enough of a gap to make it possible to pull on the panel by hand.

    2. A01EVW2

      Pull the center instrument cluster finish panel sub-assembly in the direction indicated by the arrow to disengage the 7 clips and 2 guides to remove the center instrument cluster finish panel sub-assembly as shown in the illustration.

  4. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A01EUQP

      Pull the No. 2 instrument panel register assembly in the direction indicated by the arrow to disengage the 4 clips as shown in the illustration.

    2. Disconnect the connector to remove the No. 2 instrument panel register assembly.

  5. REMOVE FRONT CONSOLE UPPER PANEL GARNISH


    1. for Blank Type:


      1. A01EU5H

        Disengage the 2 claws and remove the front console upper panel garnish as shown in the illustration.

    2. for 3 Switch Hole Type:


      1. A01EVM7

        Disengage the 2 claws as shown in the illustration.

      2. Disconnect the each connector to remove the front console upper panel garnish.

  6. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY


    1. A01ETI4E01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. A01EVFC

      Remove the 4 bolts.

    3. A01EWAV

      Pull the radio receiver assembly with air conditioning control assembly toward the rear of the vehicle and disengage the 6 clips.

    4. Disconnect each connector and remove the radio receiver assembly with air conditioning control assembly.

  7. REMOVE NO. 1 RADIO BRACKET


    1. w/o Navigation System:


      1. A01EVNX

        Remove the 4 screws and No. 1 radio bracket.

    2. w/ Navigation System:


      1. A01EWE5

        Remove the 6 screws and No. 1 radio bracket.

  8. REMOVE NO. 2 RADIO BRACKET


    1. w/o Navigation System:


      1. A01EZ4H

        Remove the 4 screws and No. 2 radio bracket.

    2. w/ Navigation System:


      1. A01EVC6

        Remove the 6 screws and No. 2 radio bracket.

  9. REMOVE AIR CONDITIONING CONTROL ASSEMBLY


    1. A01EUGI

      Disengage the 4 clips and remove the air conditioning control assembly.

  10. REMOVE NAVIGATION COMPUTER ASSEMBLY WITH WIRE


    1. A01ETU5

      Disconnect the connector.

    2. A01ETXU

      Disconnect the 2 connectors to remove the navigation computer with wire.

  11. REMOVE ANTENNA CORD SUB-ASSEMBLY


    1. A01EY46

      Disconnect the connector.

    2. Disengage the clamp to remove the antenna cord sub-assembly.

  12. REMOVE NO. 1 NAVIGATION WIRE


    1. A01EVPO

      Disconnect the 2 connectors to remove the No. 1 navigation wire.

  13. REMOVE NAVIGATION ECU