NAVIGATION SYSTEM (for Radio and Display Type) Display does not Dim when Light Control Switch is Turned ON

INSPECTION PROCEDURE

PROCEDURE


  1. CHECK IMAGE QUALITY SETTING


    1. Turn the light control switch to the tail or head position.

    2. Check that the daytime screen setting on the display adjustment screen is set to on.

      Result
      Result Proceed to
      Daytime screen setting is set to on. A
      Daytime screen setting is set to off. B

    B
    A
  2. CHECK VEHICLE SIGNAL (OPERATION CHECK)


    1. A01EYWM

      Enter the "Vehicle Signal Check Mode" screen.

      Refer to Check Vehicle Signal in Operation Check Click here.

    2. Check that the display changes between ON and OFF according to the light control switch operation.

      OK
      Light Control Switch Display
      Tail or head ON
      Off OFF

      Tech Tips

      The display is updated once per second. It is normal for the display to lag behind the actual switch operation.


    NG
    OK